Products
|
|
|
 |
Time Saver Pipe-DL (TSP16 Quad Wrap) Includes both the feed and return PEX waterlines which are wrapped four times with space age MicroFoil™ insulation, and is encased in a 4" Heavy Duty Corrugated protective sleeve. Ideal for Hydronic heating applications including outdoor boilers, wood stoves, corn stoves, solar, geothermal and other water transfer systems. Colors may vary. More >> |
|
|
 |
Sleeved Piping has a copper wire embedded in it so when water line or whatever you are burying is placed inside it, it can be found and marked at a later date if there is digging to be done in the area. The use of this sleeve now is not only wise, but protects all lines from corrosion and is time saving should the product ever need to be replaced.
Colors may vary. More >>
|
|
|
 |
Solarsaver Pipe for solar hot water systems is purpose-built insulation to meet and exceed performance requirements of solar hot water systems. Solarsaver Pipe is a system solution with pre-installed feed and return pipe for solar hydronic applications. It optimizes the thermal efficiency of the entire system and increases the life expectancy of the installation.
Colors may vary. More >>
|
|
|
 |
Blue Water Insulated Pipe is Multi-Purpose low temperature pipe specifically designed for suction and transfer of waste water in climates ranging from -40F degrees to +150F degrees. The HMW PVC body provides sub zero flexibility and an increased abrasion resistance compared to standard PVC.
Colors may vary. More >>
|
|
|
 |
PEX Tubing - PEX tubing's strength,
flexibility and memory make it ideally suited to lateral water line connections and hydronic systems including outdoor hot water furnace systems, geothermal and solar applications. We sell PEX
tubing in a wide variety of types and sizes from 1/2 - 2
inches in diameter. Colors may vary. More >> |
|
|
 |
PEX Fittings and Tools - PEX fittings are widely used for fixture connections, potable water distribution and other types of transitions between plastic and metal.
Pinnacle Supply carries fittings from SharkBite, Zurn, and Kitec. More >> |
|
|
 |
Circulating Pumps - Pinnacle Supply offers circulators, pumps and accessories typically used for the circulation of water for heat transfer in a wide range of residential and light commercial applications. Our water circulation products are available in a variety of materials including bronze, cast iron and stainless steel in capacities ranging from 3 GPM to more than 5000 GPM.
More >> |
|
|
 |
Heat Exchangers - Heat exchangers enable a transfer of thermal energy from a high-energy working fluid to a low-energy fluid. In the counter-current heat exchanger, the hot and cold fluids flow in opposite directions, which minimizes the temperature differential between the fluids at any given point and thus the resulting irreversibility. In the co-current heat exchanger, the fluids flow in the same direction.
More >> |
|
|
 |
UC1 - Uncoiler - Use for hydronic in-floor radiant heating layout and for running potable tubing. The open case serves as the unit’s base. No tools are required to assemble. A heavy-duty turntable supports a full coil of PEX (polyethylene cross-linked tubing). Eyelet loop opens for easy feeding or removal of tubing from Uncoiler unit. Rotating eyelet arm allows tubing to be pulled off in any direction. Factory-adjusted tension prevents backlash and spreading of tubing coil off the turntable. More >> |
|
|
 |
FBSN - Foamboard Stapler - No. FBSN Foamboard Stapler is for in-floor radiant heating installations. Solid one-piece aluminum magazine stands up to any rugged job-site environment. A leaf spring controlled stop automatically adjusts to setup staple and guide it through the fastening mechanism without risk of jamming or deforming staple. More >> |
|
|
 |
Radiant Barrier Insulation - Pinnacle offers a great line of insulating products featuring MicroFoil™, MicroVent™, Rigid Board™ and duct wrap.
Radiant barriers reduce heat gain and loss resulting in dollar savings and increased comfort in the home. New construction is the ideal time for installation but radiant barriers also can be easily retrofitted. More >> |
|
|
 |
The Barrier™ - Under Concrete Insulation. Ideal for hydronic, radiant heat installations. "The Barrier" is an underground insulator/vapor barrier that is made with 3/8" extruded polystyrene and heavy duty black polyethylene film laminated to both sides.
The product is strong and durable and will not collapse under the weight of the
concrete, you can walk on it during the installation. The patented taping system makes installation fast and efficient. Rolls are 4' wide x 60' long. (240 sq. feet). Available as Blk/Blk or our new Blk/White version that provides a cooler surface for installers.
More >> |
|
|
