Reflective Insulation and Radiant Barrier

Dramatically reduces heat gain and heat loss in your home!

MicroVent™ is a clean, non-toxic, easy to install, self-taping radiant barrier that provides increased comfort, energy efficiency and lower heating and cooling costs.This product is mold and fungus resistant. It is perforated for breathability under vinyl siding. This Product is highly recommended for use with vinyl sided structures.

MicroVent™ effectively reflects a heat source as opposed to absorbing and dissipating it as fiber glass insulations must do. This reflectivity works both ways: radiating summer heat outward and retaining winter heat inside.

Benefits and Specs 

Reflects Heat: MicroVent effectively reflects a heat source as opposed to absorbing and dissipating it as fiberglass insulations do. This reflectivity works both ways: radiating summer heat outward and retaining winter heat inside. Easy to Use (New Patented Self-Taping) - MicroVent is made with plies of MICROFOAM (an extremely low-density, flexible polypropylene foam), it is a much lighter weight and easier to handle than other reflective or fiber glass insulation products. Practically Eliminates Bird and insect infestation. Condensation Control - When installed correctly, MicroVent provides an excellent thermal and vapor barrier, greatly reducing condensation build-up. Simple, Safe Installation - MicroVent requires only a pair of scissors or utility knife and a staple gun. It does not require masks or long clothing for installation. MicroVent does not contain hazardous material that cause itching or respiratory problems. MicroVent is safe and easy to use. MicroVent rolls are 125' long and come in 48" widths.

MicroVent has a patented self-sealing tape on a foil flange running along one edge to make installation fast and easy. A utility knife and a staple gun are the only tools necessary. No need for protective clothing and masks. MicroVent does not contain hazardous chemicals or harmful materials that cause itching or respiratory problems. MicroVent is safe and easy to use.

Comparison Chart
Product Feature	MicroVent	Fiberglass
Stops 97% of Radiant Heat Transfer?	Yes	No
Easy to install	Yes	No
Self-taping	Yes	No
Do they insulate?	Yes	Yes
Are they a Moisture Barrier?	Yes	Yes
Will they work wet?	Yes	No
Retain R-Value when damp or exposed to moisture?	Yes	No
Lightweight and easy to handle?	Yes	No
Ease of Installation?	Yes	No
User Friendly?	Yes	No
Energy Efficient?	Yes	No

MicroVent™ Technical Data Typical Physical Properties/Product Composition: Core - 1/4" Thick Microfoam polypropylene Face - Reinforced high purity aluminum Weight for this product is .86 ounce per square foot.

Read This Before You Buy: The chart shows the R-value of this insulation. R means resistance to heat flow. The higher the R-value, the greater the insulating power. Compare insulation R-values before you buy. There are other factors to consider. The amount of insulation you need depends mainly on the climate you live in. Also, your fuel savings from insulation will depend on climate, the type and size of your house, the amount of insulation already in your house, and your fuel use patterns and family size. If you buy too much insulation, it will cost you more than what you’ll save on fuel. To get the marked R-value, it is essential that this insulation be installed properly.

Roll Size: 4' wide x 125' long Surface Emissivity: .03 Flame Spread Index-ASTM 84: 20 Smoke Development-ASTM 84: 15 Fire Rating-NFPA Spec 101: Class A/Class 1 Puncture Resistance-psi, ASTM D 3420: 90 Water Vapor Transmission-grains/hr sqft, ASTM E96: .005 Water Absorption lbs/sqft, FTMS 101B, Method 4035: .0003 Fungus Resistance, mold growth-Mil E 8261A: .0003 Useable Temperature-deg F: -150 to +200